Product Description

36″,51″,54″56″Fiberglass fan

 Product Description:

51″,54″Cast aluminum/Nylon blade Belt drive Fiberglass Fan

1.Integral molded fiberglass reinforced shell, the inner surface and the outer surface are both smooth
and flat,streamlined appearance design,low wind resistance,high energy efficiency,corrosion resistance easy to clean up without breeding bacteria;
2.Split type fiberglass reinforced blades, light weight, fan running more stable,small vibration, low noise
high energy efficiency, no rust in use life.
3.Special large pulley design with vary advantages of simple structure and maintenan ce-free bearing
4.Spring-loaded tensioner ensures belt tension and improves operating efficiency
5.Cast iron pulley with high strength, wear resistance, and long life.
6.Imported V-belt(Conti/Mitsuboshi),small deformation,long life
7.Alternative motors,such as Siemens,Speecon and so on.
8.Two kinds of optional cone fan: PE rotational molding and hand lamination fiberglass.

Fiberglass  Fan Technical parameters

name	Motor Rated Power	Static Pressure	Pa	0	12	25	37	50	Installation Open (mm)
			in.H2O	0	0.05	0.1	0.15	0.2
51″Fiberglass Cone Fan(Nylon blade Belt drive )	1.1KW	Capacity	m³/h	46700	43800	41100	37400	31600	H*W:1450*1450
			cfm	27500	25800	24200	22000	18600
		Energy Efficiency Ratio	m³/h/W	33.4	30.3	27.7	24.6	20.5
			cfm/W	19.7	17.8	16.3	14.5	12
54″Fiberglass Cone Fan(Nylon blade Belt drive )	1.5KW	Capacity	m³/h	57800	54300	51000	46900	43000	H*W:1620*1620
			cfm	34000	31900	30000	27600	25300
		Energy Efficiency Ratio	m³/h/W	32.6	30.6	28.5	26.2	23.8
			cfm/W	19.2	18	16.8	15.4	14

Partial view of fiberglass cone fan   
     

    51/54 inches Nylon blades fan                      51/54 inches Nylon blades fan                   51/54 inches Nylon blades fan                              
Production base

Pig house ventilation environmental control system

About us:

HangZhou Farm Lyric Agri-tech Co., Ltd. is located in HangZhou, a port city in ZheJiang Province, China. Our factory is 40 kilometers away from HangZhou port and 30 kilometers away from HangZhou HangZhou International Airport. The company is mainly engaged in the research and development, design, production, installation and service of CZPT and poultry breeding products. Automatic feeding system, automatic drinking water system, ventilation and cooling system, environmental control system for main pigs, cattle, sheep, chickens and geese. In addition, the company also produces steel structure products, mainly used in the engineering design and construction of modern breeding farm.
We have a first-class RESEARCH and development team, first-class process machines and injection workshop, all research and development, injection are completed in our own workshop.
In this case, we can control the quality ourselves and provide custom designs.
As a result, Haimu has been well received by customers around the world.
First-class service, first-class products, first-class management, first-class engineering is our permanent purpose.

Our advantages:

1. Your enquiry will be answered within 24 hours
2. One-stop purchasing experience
3. Customizable design
4. Our professional team will provide you with the most suitable farm solutions and the shortest delivery time.
5. Professional quality control system and after-sales service system
6. Service life of equipment: more than 10 years

FAQ:

Q1. What are the packing terms?
A: Standard export packing or according to your requirements.
Q2. What are your terms of payment?
A: 30% T/T as deposit, 70% before delivery. During the preparation period, we will report the progress of preparation to you every day, and send progress photos.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. What are your delivery times?
A: For regular products, it will take 10 to 15 days after receiving your advance payment. The exact delivery time depends on the goods and quantity you order.
Q5. Can you produce according to the sample?
A: Yes, we can produce according to your samples or technical drawings. Of course, the cost of making molds and fixtures is negotiated by both parties.
Q6. What is your sample policy?
A: We can provide regular samples, but the customer has to pay for the freight. The cost of expensive samples should be shared by both parties.
Q7. Do you test all goods before delivery?
A: Yes, we do 100% test before the goods leave the factory.
Q8: How do you maintain a long-term good relationship with our business?
A: 1. We will provide the most competitive price and quality to ensure our benefits to you;
     2. No matter where you come from, we are all friends and family. We will do our best to help you.

   

What Is a V-Belt?

A v-belt is a type of belt that provides a continuous motion to the vehicle’s wheels. This type of belt is made of several different components. They usually have a trapezium-shaped cross-section because of its elastomer core. Elastomers are often made of polyurethane or a synthetic rubber with good shock resistance. Sometimes, a v-belt will have 2 sections – cushion rubber and compression rubber.

Link-type V-belt

A laminated link-type V-belt is 1 embodiment of the present invention. The belt comprises individual lamina sections connected longitudinally by studs and tubes, each of which has at least 1 connecting means. The slots in the links allow for a full share of the load to be transferred through the belt, and they also reduce substantially all internal mechanical stresses. The belt is preferably designed to extend substantially the entire width of the machine being driven.
Conventional link-type V-belts are installed between 2 pulleys on the tight side of the V-drive. A wide end of a link moves in the direction of rotation, while the stud of a second, smaller link pulls the nose end of the third link forward. The shank of the stud pivots on a solid fabric located in hole 2 of the third link below. The bottom link, however, curls over the stud and the belt is assembled.
The present invention offers an improved method of forming a link-type V-belt. The belt is manufactured using links and does not have to be fitted as tightly as conventional link-type V-belts. This belt is flexible and strong enough to handle normal tension loads in a well-designed drive. In addition, the belts made using the present invention will have a longer life, thereby extending the drive’s load-carrying capacity.

Classical V-belt

A classical trapezoidal belt profile makes the VB Classical V-belt ideal for various industrial applications. Available in small sizes from 5mm to 3mm, these belts are available with cogged or raw edges. Their highly engineered construction makes them ideal for a variety of uses. These belts are commonly used in motors, compressors, milling machines, mixers, and other mechanical devices. To determine the right belt for your application, consider the following factors.
The classic v-belt is the most common and economically-priced type of v-belt. They are manufactured using special formulated rubber reinforced with polyester cords. These belts can span from 16 inches to 400 inches in length. The classic V-belt is also very easy to replace. The belt’s outer diameter and pitch can be measured. The length is typically standardized by the Association for Rubber Product Manufacturers.
Typically, classical V-belts are used in single-belt drives. Because they don’t require lubrication or maintenance, these belts are often available in sizes A and B. However, larger belt sizes are rarely used for single-belt drives. In such cases, multiple A or B belts are an economical alternative to single-belt C. In addition, narrower-profile V-belts provide higher power ratings than conventional V-belts because of their higher depth-to-width ratio. These belts are ideal for heavy-duty applications.

Narrow V-belt

The narrow v-belt is the same as a conventional v-belt, but it has a smaller top and bottom width. This makes it suitable for higher horsepower applications, and it is used in high-end sports cars. Narrow v-belts are generally characterized by a letter “v” on the top side and a length of outside dimensions of 1.6:1.
The steel wires that comprise the core of the v-belt are endless and are free of joints. This provides the strength required for torque transmission. A base rubber compound is placed around the steel wire and acts as a medium of compression and shock absorption during power transmission. A plastic layer acts as a protective cover, and provides the rubber with a degree of temperature tolerance. While choosing a narrow v-belt, it is important to keep in mind that there are some disadvantages to a narrow V-belt.
For example, a narrow V-belt is suitable for high-power applications, and may be used in a small assembly space. Its narrow profile also allows it to be space-saving in layout and allows high-speed drives without additional belts. Furthermore, it reduces operating and maintenance costs. It is ideal for applications where space is limited, and a high torque is required. The benefits of a narrow V-belt are plentiful.

Banded belt

Identifying a banded v-belt can be tricky, but there are a few signs that can indicate a possible problem. Cracked belts can be difficult to spot, but they can be an early indicator of a more serious problem. Look for cracked underside edges, worn covers, and misplaced slack. If 1 or more of these factors applies to your belt, you may want to seek a replacement.
Banded v-belts are made with an elastomer core. The main component of this belt is the elastomer, which is used for the band’s flexural strength and shock resistance. It’s sometimes separated into 2 sections, with each section connected to the other by a tension cord. This gives the belt its trapezium cross-section, which increases tensile strength.
The 2 main types of banded v-belts are wrapped or raw edge. Wrapped v-belts have a fiber-covered body while raw edge belts are uncovered. Banded v-belts are often classified by their cross-section, and include: standard v-belt, wedge v-belt, narrow versus double v-belt, cogged v-belt, and double t-belt.
Banded v-belts are popular with commercial applications. Whether you’re looking for a 2V-belt or a large 8V-belt, V-Belt Guys has what you need. We also stock a wide variety of different banded v-belts and can help you find 1 that fits your needs and budget. Take a look at our selection today!

Traditional V-belt

Although a traditional V-belt may be a glorified rubber band, modern variations reflect advances in engineering. Proper installation and maintenance are essential for trouble-free service. When you are replacing a traditional V-belt, be sure to follow these simple steps to ensure its longevity. Read on to learn more. Listed below are the features of each type of V-belt. Identify the type of belt you need by measuring its top width, circumference, and dimensions.
TEC Traditional V-belts have an exceptionally low slip rate and are resistant to high operating temperatures. These types of belts do not experience early belt aging. They are also highly resistant to poor operating conditions. However, the maintenance is more extensive than other types of belts. A typical V-belt part number is B50, which is the cross-section size of a 50-inch belt. The belt’s lifespan is greatly increased because of this feature.
A ribbed V-belt is another option. It has a deeper V than a traditional V-belt. The ribs in this type are narrower and more flexible. These ribs are smaller than the classic V-belt, but they can transmit 3 times as much horsepower. Because they are thinner, these belts are more flexible than traditional V-belts. The thickness of the ribs is less critical.

Metric V-belt

Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.
Metric V-belts are generally more durable than their equivalents made of standard American-sized belts. Metric V-belts are available in many different sizes to fit different machineries. In addition to offering superior load-carrying capacity, Metric Power(tm) V-belts are known for their exceptional flex and stretch characteristics. For optimum performance in textile mills, food processing, and machine tool applications, Metric Power(tm) V-belts are manufactured using a proprietary construction that combines a higher load-carrying capacity with superior flex and stretch.
Metric belts can generate 50% to 100% more horsepower than conventional and classic sectioned belts. This is achieved through improved construction and placement of the cord line. These belts also have unique wedge designs that help them support the cord in motion. However, you must ensure the proper tension when buying a Metric V-belt, because improper tension may damage the belt. They are compatible with both U.S. and international standards.